In this DIY project, you will learn how to interface LEDs with an 8051 microcontroller by simulating it on proteus software.

In this DIY project, will learn how to control a servo motor with an IR remote by interfacing it with Arduino using Tinkercad software.

In this DIY project, you will learn how to control a DC motor with an IR remote by interfacing it with the Arduino UNO board using Tinkercad

In This DIY project, we will see how to make an automatic scrolling text on a 16*2 LCD by interfacing with the Arduino UNO board.

In this blog you will get an idea about what is a Neopixel strip and how to interface it with Arduino using Tinkercad software

In this Blog you will get an insight regarding what are transmission lines, Their parameters, types, properties and applications.

In this blog you will get an insight regarding: what are microcontrollers, their essential components and their types.

Power factor is defined as the ratio of real power to apparant power. In this blog, we will study the importance of power factor in detail.

Counters are used to count clock pulses. Ripple counter is an asynchronous counter. Read this article to know about Ripple Counters.

Three-phase systems have three phases. Read this article to know how the three phases systems are connected in star and delta connection.

Field Effect Transistor is a voltage-controlled device. It is one of the simplest FETs. Read this article to know more about JFET.

This article explains the Random Access Memory (RAM)and Read-Only Memory (ROM). Read this article to know the differences between them.

An encoder in digital electronics encodes the information and it is decoded by decoder. Read this article to know about Encoder and Decoder.

Number System is used to represent data in digital systems. To understand the conversion process in number systems read this article.

In this project, we will learn how to use a tilt ball switch which powers the circuit based on its orientation.

In this project, we will controll the PWM of LED (i.e., illumination intensity can be controlled) by varying the duty cycle.

In this project, we will see how to use a joystick module to control servo motor using Arduino UNO.

In this project we will see how to change the brightness of LED using the Arduino UNO by changing the duty cycle.

Have you ever thought about how does energy transfers from powerhouses to our homes. Read this article to know how energy is transferred.

In this project, we design a current sensor with Arduino UNO using which the current concumed by the appliances can be calculated.